FiltaCarb Vapour Phase Series.

Australian designed, engineered and manufactured.

FiltaCarb Carbon Vapour Filtration from Bioaction

FiltaCarb - Activated Carbon Air Filters

Functional description -

The FiltaCarbTM system is a single-stage treatment using carbon adsorption technology. Hazardous gases are extracted from the source using an extraction/blower fan that then vents the untreated gases through the filter media. The untreated gases accumulate in the lower plenum of the filter before being evenly diffused through the media of the filter bed where contaminates are physically adsorbed. A specific activated carbon media mixture is used to treat the target gases to achieve more than 99.5% removal of source gases.

Construction description -

FiltaCarbTM vessels are constructed from P300 HDPE, incorporating impregnated resins that are corrosion resistant and UV stabilized throughout the material. They have a high chemical-resistance to provide significant design life expectation and are suitable for all climatic conditions. Construction follows DVS 2202 / 2210 technical codes on plastic joining. Joint construction is butt-welded and extrusion welded.

Absorptive media description -

Utilises a specifically designed activated carbon for use in odour control systems where the primary cause of odour is as a result the presence of mercaptans, Hydrogen Sulphide (H2S), and VOC’s. Customised media blends and mixtures can be supplied to meet any needs that fall outside the capacities of our standard activated carbon materials.
 

FiltaCarb Vapour Phase Series Range
Models  FC155  FC225  FC350  FC510  FC900  FC1400  FC1900
Litres / sec 155 225 350 510 900 1400 1900
m3 / hr 558 810 1260 1836 3240 5040 6840
Empty Bed Residence Time (sec) 3 3 3 3 3 3 3
Vessel Outside Diameter (m) 1.0 1.2 1.5 1.8 2.4 3.0 3.6
Skid Width (m) 1.5 1.6 1.6 1.8 2.4 3.0 3.6
Skid Length (m) 2.4 2.4 3.0 3.0 4.0 4.8 4.8
Vessel Height (m) 1.78 2.18 2.22 2.38 2.56 2.75 3.01

Misc. Heights - Skid, Duct etc (m)

0.16 0.16 0.16 0.16 0.16 0.16 0.16
Total Height (m) 1.94 2.34 2.38 2.54 2.72 2.91 3.17

Media Volume - GAC (m3)

0.47 0.68 1.05 1.53 2.70 4.20 5.70

Media Depth - GAC (m)

0.62 0.62 0.61 0.61 0.61 0.60 0.57

Media Mass - GAC (kg)

260 378 588 857 1512 2352 3192

Vessel Mass (kg)

88 120 169 219 343 478 692

Skid Mass (kg)

200 200 255 300 420 576 690

Misc. Mass (kg)

105 130 135 160 200 350 380

Total Mass (kg)

653 828 1147 1535 2475 3765 4954

Duct Size ID (mm)

154 240 240 300 375 500 500

Pressure Drops - Vessel (Pa)

508 514 511 520 514 511 470

Fan Model No.

Seat 20 Seat 20 Seat 20 Seat 25 Seat 35 Seat 35 Seat 35

Fan Motor Size (KW) 

1.10 1.10 1.10 2.20 5.50 5.50 5.50

Our Aim!

Bioaction works closely with its clients in providing the most suitable and cost-effective solution for their particular application. We pride ourselves in providing the highest level of workmanship and customer service. We are recognised for our evolving innovation and commitment to the science of odour abatement.

Instagram

Our Staff

The team at Bioaction are fully skilled to walk a client through the most suitable design for there specific application.

  • Design
  • Engineering
  • Construction
  • Installation
  • Commissioning
  • Maintenance

Contact Us

  • PO Box 3822, Tuggerah,
    NSW, 2259

    H.O: 12 Mildon Road
    Tuggerah, NSW, 2259

  • Phone: +61 (0) 2 4353 4822

  • Fax: : +61 (0) 24384 0948

  • Email: enquiries@bioaction.com.au