Sustainable Filter Systems.

Australian designed, engineered and manufactured.

Activated Carbon Passive Vent Filter Range

      

     FV30 Assembled                 FV30 Disassembled                                 FV60 Disassembled                                FV120 Disassembled 

Two styles of Ground Mount Passive Vent Filters

  1. Passive Ground Mount Vent Filter 
  2. Passive Two-way Ground Mount Vent Filter

Passive Ground Mount Vent Filter

FiltaVentTM passive venting ground mounted, activated carbon cartridge, odour filtration system for the control and mitigation of odourous sewer gases.

Benefits of FiltaVentTM passive vent filters:

• Suitable for municipal sewer odour mitigation and domestic septic tank odour mitigation applications
• More than 99.5% of odours removed
• Low static pressure
• Range of multi-cartridge options
• Easy installation
• Replaceable activated carbon cartridges
• Insect and vermin proof
• Can connect to external vent duct
• Vandal resistant

About FiltaVentTM carbon filter technology

FiltaVentTM passive vent filters are cost effective and efficient ground mounted filter systems with replaceable cartridges. Each one is a self-breathable passive filter with low static pressure that can be used to solve a range of odour issues on sewage pumping stations, vent stacks and pressure relief valves. Depending on the flow capacity requirements, there is a FiltaVentTM model configuration that has been designed to suit installation on top of air valves, sewer manholes, pump stations or small sewage treatment plants and also to replace old corroded vent stacks.

Replacement FiltaVentTM cartridge filters:

All FiltaVentTM passive vent filters are supplied with replaceable cartridges that can easily be changed by operators, when the activated carbon cartridge is exhausted. At only 23 kg, the cartridge can be easily removed and safely replaced manually. The media is a performance activated carbon for the combined removal of gases such as Hydrogen Sulphide (H2S), Dimethyl Sulphide, Mercaptans and VOC’s.

The FiltaVentTM range offers multi-cartridge systems to meet larger target flows. The units are robust and the independent plenum base ensures air is evenly distributed throughout the media bed. This optimises the capacity of the activated carbon filter media, therefore maximising its performance.

Bioaction FiltaVentTM filter systems are designed, engineered and made locally to suit Australia’s wide and often harsh range of operational conditions. FiltaVentTM filters have a high chemical and UV resistance to provide significant design life expectation and are suitable for all climatic conditions.

Download FiltaVentTM ground mount filter brochure

 Passive Ground Mount Filters can be installed within one day and results are instantaneous.

    

      CART30 Cartridge                 FV20 Assembled                  FV30 Assembled                FV60 Assembled                   FV120 Assembled

Passive two-way ground mount vent filter

FiltaVentTM two-way passive venting ground mounted, activated carbon cartridge, odour filtration system for the control of odourous sewer gases.

Benefits of FiltaVentTM two-way passive vent filters:

• Suitable for municipal sewer odour mitigation and domestic septic tank odour mitigation applications
• More than 99.5% of odours removed
• Can connect to external vent duct / stack
• Allows air inflow into sewer system
• Low static pressure
• Range of multi-cartridge options
• Easy installation
• Replaceable activated carbon cartridges
• Insect and vermin proof
• Vandal resistant

About FiltaVentTM carbon filter technology

FiltaVentTM two way passive vent filters are cost effective and efficient ground mounted filter systems with replaceable activated carbon cartridges. Each one is a self-breathable passive filter with low static pressure that can be used to solve a range of odour issues. Applications for this system is where there is a need to allow a high flow of inlet air on demand from the system. The annulus filter design lowers the static pressure across the filter bed without compromising surface contact and residence time. The FiltaVentTM two way filter can act as or connect to a vent stack to create air inflow while treating odorous outflow.

Depending on the flow capacity requirements there is a range of FiltaVentTM two way model configurations that has been designed to suit installation on top of air valves, sewer manholes, pump stations and small sewerage treatment plants and also to replace old corroded vent stacks. 

Replacement FiltaVentTM cartridge filters:

All FiltaVentTM passive vent filters are supplied with replaceable cartridges that can easily be changed by operators, when the activated carbon is exhausted. At only 33 kg, the cartridge can be easily removed and safely replaced manually. The media is a performance activated carbon for the combined removal of gases such as Hydrogen Sulphide (H2S), Dimethyl Sulphide, Mercaptans and VOC’s.

The FiltaVentTM range offers multi-cartridge systems to meet larger target flows. The units are robust and the independent plenum base ensures air is evenly distributed throughout the media bed. This optimises the capacity of the activated carbon filter media, therefore maximising its performance. 

Bioaction FiltaVentTM filter systems are designed, engineered and made locally to suit Australia’s wide and often harsh range of operational conditions. FiltaVentTM filters have a high chemical and UV resistance to provide significant design life expectation and are suitable for all climatic conditions

Download FiltaVentTM two-way passive ground mount filter brochure

Two-way passive ground mount filters are easily fitted to existing vent stacks. 

                                                     

                   two FV40P Venting Options                 2WCART40 Cartridge               FV40P with vent stack                                                                 LH open, RH sealed for vent stack diversion                                                                  diverter unit

Our Aim!

Bioaction works closely with its clients in providing the most suitable and cost-effective solution for their particular application. We pride ourselves in providing the highest level of workmanship and customer service. We are recognised for our evolving innovation and commitment to the science of odour abatement.

Instagram

Our Staff

The team at Bioaction are fully skilled to walk a client through the most suitable design for there specific application.

  • Design
  • Engineering
  • Construction
  • Installation
  • Commissioning
  • Maintenance

Contact Us

  • PO Box 3822, Tuggerah,
    NSW, 2259

    H.O: 12 Mildon Road
    Tuggerah, NSW, 2259

  • Phone: +61 (0) 2 4353 4822

  • Fax: : +61 (0) 24384 0948

  • Email: enquiries@bioaction.com.au